The durable gate opener has all the same benefits as the RAM 1000, but comes with a powerful ¾ horsepower motor, allowing it to handle gates up to 1500 pounds. As with the RAM 1000, the RAM 5500 motor is both direct drive (no belt) and is continuous duty for worry-free operation.
It also comes equipped with foot pedal release safety system, for easy manual opening and closing of the gate during power outages and emergences.
Maximum Weight: 2500 lbs
Maximum Travel: 45 ft
Motor: 1HP Continuous Duty
Gate Traveling Speed: Approx. 1′ per sec
Operating Temperature: -10 to 160 degrees F
Overall Dimensions: H:27” L:16” W:16½”
Electric Motor: 1 HP, 110 VAC. 9.4 amp 50/60Hz. with high speed ball bearing and resettable overload button.
Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation.
Limit Switches: Mechanical adjustment for accurate gate stop settings.
Cover: High-impact resistant charcoal gray polyethylene.
Finish: Gold/Zinc plated to inhibit corrosion.
Secure the gates closed.
A safety device that stops the gate from closing on a vehicle.
Solid sized and UHMW wheels available
Mechanical chain release fire box designed for use on sliding gates.
Opens your gate when power is lost.
1/4″ angle iron flats, 3/16″ square tubing legs. Used to mount the operator off the ground.
Suitable for use on entry doors where access is restricted by a key.
Heavy duty UHMW rollers available in various lengths.
Heavy duty UHMW rollers adjust to fit any gate.
Maintains power to your operator and accessories when the main power is lost. 750W output.
Square – 16 ga.
Available in 48″padmount or 66″ in-ground. used for mounting keypads, phone entry systems, card readers…etc.
Left / Right hand Switch Adjustment
One pass, ERD Sensitivity Adjustments
3-Wire Master/Slave Synchronization Cable
Plug-in Loop Detector (ILD-24s) Capability
Pre-warn & Constant Warn
Open & Close Delay
Relay Connection & Service Push Buttons