In most commercial applications, toughness is the number one priority. Our sectional overhead garage doors are expected to work every day, all day, so they need to be built to last. This line of tough standard duty doors is built to demanding specifications, making them ideal commercial doors for any application.
- 2” Thick Sections
- 24 gauge commercial quality steel
- Polystyrene Insulation with 27-gauge steel back
- Ribbed Panel Profile (2 horizontal ribs with alternating “v” grooves)
- Max Width – 24’2″*
- Colors – White, Brown, Sandstone or Gray, stock RAL powder-coat option in 188 colors
- R-value 8.00**
- Various accessories and options available.
*Contact Customer Service for Larger Sizes
**R-Values have been calculated in accordance with ASTM C518 standards
Roll-formed sections are 24-gauge 2” thick, hot-dipped galvanized with a baked-on polyester finish
- Box shaped stiles are riveted to the face of the section and are galvanized for additional corrosion protection
- Tongue and groove meeting rails provide superior rail strength and weather resistance
- Panel Profile: 2 horizontal ribs with alternating “V” grooves
Insulation:
- 1-1/2” thick CFC free polystyrene
- 27 gauge Steel inside cover (fastened with plastic retainer strips)
- R-value 8.00 (R-value Testing is in accordance with ASTM C518 standards)
Colors:
- White, Brown, Sandstone, Grey
- Interior color: white polyester primer and topcoat
- Optional Colors include RAL powder-coat in 188 colors
- Tracks are 2” or 3”, as specified
- Available in bracket mount, angle mount, clip angle mount, 12” radius, 15” radius, high lift, vertical lift, roof pitch, or dual track low headroom
- Optional one (1) piece 2” vertical lift track is available for doors 7’ to 10’ high
Doors are available with a variety of Specialty Options for specific installation needs. Contact Factory for additional options.
Swing-Up Sectional Post
A perfect answer for openings that are too large for a single overhead door that must accommodate large machinery or equipment on an infrequent basis. Operating on a single pivot point that is designed to swing left or right, it allows the use of one (1) smaller door for everyday requirements and the full opening when needed.
Header & Jamb Seals
Seal the perimeter of the opening to provide additional air infiltration and thermal protection.
Wind can be unpredictable and destructive. This is why C.H.I. Windbreaker Series and iSeries doors are designed, tested, and built to the most rugged specifications. Wind chamber tested to ensure windload resistance, these extra-sturdy designs provide enhanced defense against the elements.
C.H.I. Overhead Doors developed the resilient Windbreaker Series garage doors to protect against high wind conditions. The super-resilient C.H.I. iSeries Impact Approved doors have strength designed to withstand direct collision of projectiles and other windborne debris at high speeds.