The affordable gate opener features a low maintenance, direct-drive ½ horsepower motor, handling gate systems up to 700 pounds. Simple to install and use, the RAM 100 comes equipped with the foot pedal release safety system, allowing easy manual opening and closing of the gate during power outages and emergences. The RAM 100 also features our Whisper Quiet motor operation.
Maximum Weight: 700 lbs
Maximum Travel: 20 ft
Motor: Continuous Duty
Gate Traveling Speed: Approx. 1′ per sec
Operating Temperature: -10 to 160 degrees F
Overall Dimensions: H:22” L:14½” W:15”
Electric Motor: 1/2 HP, 120 VAC. 4.5 amp 50/60Hz. with bearing and resettable overload button.
Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation.
Limit Switches: Mechanical adjustment for accurate gate stop settings.
Cover: High-impact resistant charcoal gray polyethylene.
Finish: Gold/Zinc plated to inhibit corrosion.
Ramset Magnetic Lock
Secure the gates closed.
ILD-24S Loop Detector 
A safety device that stops the gate from closing on a vehicle.
V Grove Wheels 
Solid sized and UHMW wheels available
Chain Drop Box
Mechanical chain release fire box designed for use on sliding gates.
Ramset BBS-Battery Back-Up System 
Opens your gate when power is lost.
Post Mounts 
1/4″ angle iron flats, 3/16″ square tubing legs. Used to mount the operator off the ground.
Key Switch Box 
Suitable for use on entry doors where access is restricted by a key.
Guide Rollers 
Heavy duty UHMW rollers available in various lengths.
Adjustable Guide Roller 
Heavy duty UHMW rollers adjust to fit any gate.
RPI (Ramset Power Inverter) 
Maintains power to your operator and accessories when the main power is lost. 750W output.
Keypad 
1,024 Codes
5,112 Event Log
LCD Display
7-Day Timer
Time Zones
Latching/Hold Open
Stainless Steel Faceplate
Goose Necks 
Square – 16 ga.
Available in 48″padmount or 66″ in-ground. used for mounting keypads, phone entry systems, card readers…etc.
Left / Right hand Switch Adjustment
One pass, ERD Sensitivity Adjustments
Automatic Timer
3-Wire Master/Slave Synchronization Cable
Plug-in Loop Detector (ILD-24s) Capability
Pre-warn & Constant Warn
Secure Close
Open & Close Delay
Relay Connection & Service Push Buttons
Radio Cycle
