High quality, 24 gauge 2-inch thick uninsulated steel door. The Grande Series sets the standard by which all other doors of this type are measured; it is undeniably the best in its class.
Sections are 2 inches thick in 21- and 18-inch heights. Each section is manufactured from 24 gauge hot-dipped galvanized steel. Sections are pre-painted white and rotary embossed with a woodgrain texture. Ultra high definition raised panels are pressed in 1/8” height increments to a depth of .375”. Tongue and groove-meeting rails are roll formed into the panel, incorporating the RITS™ reinforced integral truss system. Vertical stile members are 19 gauge hotdipped galvanized I-beams pre-painted white to match the interior side of the section. Stiles are riveted and bonded to the interior face of the door with an epoxy-based cement. Bottom sections are reinforced with aluminum “L” angle and bonded to the bottom of the section for supporting a replaceable UV protected bottom weather seal.
H-2 Hardware and Track; is hot-dipped galvanized, 14 gauge wide body end roller hinges and 16 gauge interior hinges. Rollers are 2-inch black nylon, galvanized torsion tube, selflocking fasteners, pre-painted springs and inside slide lock.