Short and Long Ultra High Definition Raised Panels
Quality constructed 25 gauge, 2-inch thick uninsulated steel sectional garage door for the economically minded customer. Simply stated, no other door manufacturer builds a higher quality low cost steel door with the features of 1st United Door Technologies.


Sections are 2 inches thick, and manufactured from 25 gauge hot-dipped galvanized steel in 21- and 18-inch heights. Sections are pre-painted white and rotary embossed with a woodgrain texture. Ultra high definition raised panels are pressed in 1/8″ height increments to a depth of .375. Tongue and groove-meeting rails are roll formed into the panel, incorporating the RITS™ reinforced integral truss system. Vertical stile members are 19 gauge hot-dipped galvanized I-beams pre-painted white to match the interior side of the door. Stiles are riveted and bonded to the interior face of the door with an epoxy-based cement. Bottom sections are reinforced with aluminum “L” angle and bonded to the section for supporting a replaceable UV protected bottom weather seal.

H-1 Hardware and Track; is hot-dipped galvanized, 16 gauge wide body hinges, black nylon rollers, self-locking fasteners, galvanized torsion bars and pre-painted spring. (Insulated and glass top doors require H-2 hardware)